Reliable Home Services in Franklin

Diagnosed and repaired failed heat exchanger in furnace showing significant rust and corrosion around burner ports. Replaced primary heat exchanger assembly and verified proper operation of electrical components including pressure switch and wiring connections. System now functioning within manufacturer specifications with normal heat output.

Completed routine tune-up service on customer's HVAC system. Performed temperature readings using digital thermometer, recording 60.8°F at supply register. Inspected internal components and warning labels for proper operation and safety compliance.

Performed comprehensive tune-up on HVAC system, including inspection of ductwork, refrigerant lines, and drainage components. Examined and tested UV light purification system with warning indicators functioning properly. Inspected control module with digital display and verified proper operation of all electrical connections and control wiring. System is now operating at optimal efficiency with all components properly maintained.

Installed Bradford White water heater in basement utility area, connecting all necessary copper and PVC piping. Ensured proper installation with all manufacturer specifications met and system functioning correctly.

Performed routine maintenance on residential HVAC system. Conducted temperature differential measurements across ductwork using digital thermometer, recording readings of 66.9°F. Completed diagnostic testing of furnace/air handler using probe instrument, inspecting internal components and verifying proper operation of all system functions.

Performed comprehensive HVAC tune-up service including electrical diagnostics with Fieldpiece SC660 multimeter to verify proper voltage and amperage readings across system components. Conducted thorough inspection of ductwork to assess condition, airflow integrity, and cleanliness, noting no significant issues requiring immediate attention.

Conducted inspection of existing water heater system in unfinished basement showing signs of rust and deterioration. Provided estimate for complete replacement of aging unit, including new connections to existing copper supply lines and proper venting. Recommended upgrading to more efficient model based on household needs and current mechanical room configuration.

Performed comprehensive tune-up service on Carrier furnace system in basement utility room. Inspected and cleaned exhaust system including PVC venting with multiple elbows. Verified proper electrical connections at control panel and checked system operation through complete heating cycle. Equipment is functioning within normal parameters with no immediate concerns identified.

Performed scheduled maintenance on Carrier HVAC system. Replaced air filter and conducted electrical diagnostics using SC680 multimeter, measuring microamp draw (4.1 μA) to verify proper system operation. All components functioning within normal parameters.

Performed scheduled maintenance on customer's HVAC system. Opened access panel to inspect internal components, checked all electrical connections and control mechanisms. System appears to be in normal operating condition with no signs of damage, leaks, or unusual wear.

Performed scheduled maintenance visit on residential HVAC system. Inspected Honeywell digital thermostat and control wiring connections, verified proper operation of circuit board components, and ensured all wire connections were secure and properly terminated.

Successfully completed installation of a new furnace system, including proper connection of refrigerant lines and verification of condensate drainage. Installed copper linesets according to manufacturer specifications and ensured proper drainage to the floor drain for efficient system operation.

Performed annual tune-up on HVAC system. Conducted comprehensive electrical testing using Fieldpiece SC680 multimeter, measuring microamp readings at 3.4 μA DC and voltage readings at 59.76V. All electrical parameters were verified to be within manufacturer specifications, ensuring safe and efficient system operation.

Conducted comprehensive evaluation of aging HVAC system in basement mechanical room, including assessment of furnace unit with visible control panels and wiring, along with adjacent water heater installation with associated copper and PVC piping. Documentation completed with detailed photographs of current equipment to support replacement recommendation, noting configuration of existing ductwork, ventilation systems, and utility connections necessary for proper system upgrade planning.

Performed annual preventive maintenance on a residential Carrier furnace unit located in the basement mechanical room. Conducted full electrical diagnostic testing with SC680 multimeter, checking amperage readings (3.0 mA) to verify proper component operation. Visual inspection revealed system to be in normal operating condition with no visible damage or anomalies to the furnace or connected ventilation components.

Conducted thorough inspection of basement HVAC and ductwork system. Identified aging galvanized metal ducts with potential airflow restrictions and recommended replacement. Evaluated existing mechanical equipment mounted against concrete block wall for compatibility with new ductwork configuration.

Performed diagnostic gas analysis on heating system using Sauermann analyzer, which detected elevated carbon monoxide (CO) levels between 927-1139 ppm, indicating combustion issues. Oxygen levels measured at 3.23-3.61% with CO₂ readings around 9.7-9.9%, suggesting improper air-fuel mixture requiring adjustment or possible heat exchanger inspection.

Performed routine commercial tune-up on HVAC system. Noted significant mineral buildup and corrosion around valve connections on heat exchanger pipes. Cleaned accessible components and inspected electrical connections, observing proper wire terminations at motor assembly. System operational but recommend follow-up service to address progressive corrosion issues on heat exchange components.

Performed comprehensive HVAC tune-up service, including inspection of internal components, circuit board examination, and verification of all electrical connections. System wiring was assessed for proper termination and safety, with particular attention to the motor assembly and control board connections. All components were confirmed to be secure and operating within manufacturer specifications.

Performed comprehensive tune-up on Carrier Infinity HVAC system including inspection of ductwork integrity. Used diagnostic equipment (ST43) to verify system performance and functionality. Interior duct inspection revealed normal condition with no significant debris or damage observed.