Reputable Home Services in West Allis

Responded to emergency AC service call and installed temporary capacitor to restore cooling function, though long-term reliability is uncertain. Documented electrical panel configuration and provided estimate for complete system replacement due to failing components.

Responded to no cooling call on system installed in 2023. Upon arrival, performed diagnostic evaluation of HVAC equipment including furnace and air handler components. Inspected system installation, verified proper PVC condensate drainage routing, checked electrical connections, and examined ductwork configuration. System components appeared to be in good condition with proper installation standards observed. Completed troubleshooting procedures and restored cooling operation to unit.

Responded to no cooling complaint on aging residential air conditioning system. Upon arrival, performed diagnostic evaluation of outdoor condenser unit showing signs of weathering and age-related deterioration. Connected manifold gauge set to measure system pressures and assess refrigerant charge levels. Gauges indicated abnormal operating pressures consistent with potential refrigerant loss or compressor issues. Advised customer that unit has reached end of serviceable life expectancy and temporary repair may not be feasible or cost-effective. Customer acknowledged plans to proceed with full system replacement and requested diagnostic findings to inform replacement decision.

Conducted on-site evaluation for air conditioning system addition to existing gas furnace and ductwork infrastructure. Assessed current HVAC equipment configuration, electrical panel capacity and available circuits for AC installation, and verified compatibility of existing forced-air distribution system with proposed cooling equipment.

# HVAC Installation Completed Successfully installed a ductless mini-split air conditioning system in an upper-level interior space with sloped ceiling configuration. The indoor wall-mounted unit was positioned on the interior wall to provide optimal air distribution throughout the room, with all refrigerant lines properly installed and concealed. System was tested, charged to manufacturer specifications, and verified operational for both cooling functionality and airflow performance.

Performed comprehensive 10-point tune-up on residential air conditioning system. Connected manifold gauges and diagnostic equipment to evaluate system performance, checked refrigerant pressures and temperatures, inspected condenser unit operation including fan motor and compressor function. Unit operating within normal parameters upon completion of maintenance procedures.

Completed installation of new Kohler two-piece toilet in residential bathroom. Removed existing fixture, verified proper flange condition, set new unit with wax ring seal, secured to floor, connected water supply line, and tested for proper operation and leaks.

Completed full HVAC system installation including new outdoor air conditioning unit with associated coil and Honeywell Home digital thermostat. Installed exterior condensing unit on composite equipment pad with proper electrical disconnect and conduit connections, established refrigerant line sets between outdoor and indoor components, and mounted programmable thermostat on interior wall for system control and temperature management.

Responded to service call for air conditioning unit producing clunking noise during operation. Upon arrival, inspected outdoor condenser unit and surrounding components, documented equipment condition with photographs showing unit properly positioned on concrete pad with adequate clearance and access to refrigerant lines and electrical connections. Conducted operational assessment to identify source of mechanical noise and verified system functionality.

Completed full HVAC system installation including new furnace, air conditioning unit, and F100 air filtration system. Installed new air handler with vertical configuration in basement utility area, connected refrigerant line set with proper insulation, and integrated all ductwork connections. All equipment mounted, electrical connections completed, condensate drainage established, and system tested for proper operation.

Conducted estimate for air conditioning system addition to existing home with Carrier gas furnace currently installed in basement. Assessed installation requirements, reviewed existing ductwork infrastructure and determined optimal placement for outdoor condensing unit on exterior side of home near foundation with PVC condensate drainage routing. Documented existing furnace configuration, available electrical service, and recommended AC unit positioning to integrate with current heating system for complete HVAC functionality.

Completed routine cooling system maintenance visit as part of membership agreement. Performed comprehensive inspection of outdoor condensing unit, which showed significant accumulation of leaves, twigs, and organic debris in the base pan and around compressor components. Cleaned debris from unit interior, inspected compressor, capacitor, refrigerant lines, and electrical connections, and verified all components were operating within normal parameters.

Responded to commercial property for water leak originating from first floor and extending down to basement level. Upon inspection, discovered deteriorated wooden structural members with significant moisture damage and rot in the affected area, evidenced by heavy black staining on horizontal and vertical support beams. Located and repaired the source of the leak involving aged copper piping showing green patina oxidation. Addressed secondary plumbing issue involving PVC drainage system with corroded metal collar fitting causing rust staining on surrounding tiled surface. Completed installation of new water line connection for refrigerator appliance as requested.

Successfully installed a new Bradford White residential water heater in the basement utility area. The installation included proper connection of copper supply piping with brass fittings and shut-off valves, gas line hookup with appropriate controls, and venting system installation. Unit was tested for proper operation and all safety checks were completed.

Conducted on-site assessment for sump pump installation in residential property currently lacking basement water management system. Evaluated basement conditions and determined requirements for complete sump pump system including excavation for crock basin installation. Documented existing basement infrastructure including overhead ductwork showing advanced corrosion and deterioration, floor joist configuration, and foundation exterior conditions adjacent to lawn area where discharge line routing would be required.

Responded to no heat call on Lennox Elite system. Upon arrival, accessed unit and performed diagnostic inspection of internal components including blower assemblies, electrical connections, and control systems. Inspected all mechanical and electrical components, verified proper wiring connections, and checked capacitor operation. System was evaluated and appropriate corrective measures were taken to restore heating operation to the unit.

Completed installation of a comprehensive water treatment system in basement utility area, including a black water softener tank and Capital brand water filtration system with digital control head. Installed and connected white PVC piping configuration with shut-off valves, integrated copper supply lines to existing plumbing infrastructure, and established proper drainage connections using flexible corrugated hose. Mounted control components to concrete block wall, completed all electrical connections between units, verified proper system operation, and provided documentation for homeowner reference.

Completed scheduled prepaid maintenance visit on residential air handler unit located in attic space. Performed comprehensive system inspection including examination of condensate drainage lines, refrigerant connections, and electrical components. Air handler unit found in operational condition with copper refrigerant lines showing normal patina consistent with system age. Verified condensate drain system functionality and confirmed all mechanical components secured properly. System operational at time of departure.

Responded to no heat call on HVAC system less than 10 years old. Upon inspection, found loose or disconnected low-voltage wiring at the furnace control board that was preventing the heating system from receiving proper signal from the thermostat. Reconnected and secured all low-voltage wire connections at the control board terminals, verified proper wire placement according to manufacturer specifications, and tested system operation. Unit fired successfully and restored heat to the residence.

Completed full HVAC system installation in residential basement, including new Patriot high-efficiency furnace and Lennox air handler with Thermann branded components. Installed copper refrigerant line sets with proper insulation, white PVC condensate drainage and venting system, and gray metal supply/return ductwork with plenum transitions. Mounted all equipment on protective base pads over concrete flooring with proper clearances for code compliance and future maintenance access. Ran electrical connections, secured all piping and ductwork, verified system startup, and tested all components for proper operation.