Reliable Home Services in Franklin

Performed scheduled maintenance on customer's HVAC system. Opened access panel to inspect internal components, checked all electrical connections and control mechanisms. System appears to be in normal operating condition with no signs of damage, leaks, or unusual wear.

Performed scheduled maintenance visit on residential HVAC system. Inspected Honeywell digital thermostat and control wiring connections, verified proper operation of circuit board components, and ensured all wire connections were secure and properly terminated.

Successfully completed installation of a new furnace system, including proper connection of refrigerant lines and verification of condensate drainage. Installed copper linesets according to manufacturer specifications and ensured proper drainage to the floor drain for efficient system operation.

Performed annual tune-up on HVAC system. Conducted comprehensive electrical testing using Fieldpiece SC680 multimeter, measuring microamp readings at 3.4 μA DC and voltage readings at 59.76V. All electrical parameters were verified to be within manufacturer specifications, ensuring safe and efficient system operation.

Conducted comprehensive evaluation of aging HVAC system in basement mechanical room, including assessment of furnace unit with visible control panels and wiring, along with adjacent water heater installation with associated copper and PVC piping. Documentation completed with detailed photographs of current equipment to support replacement recommendation, noting configuration of existing ductwork, ventilation systems, and utility connections necessary for proper system upgrade planning.

Performed annual preventive maintenance on a residential Carrier furnace unit located in the basement mechanical room. Conducted full electrical diagnostic testing with SC680 multimeter, checking amperage readings (3.0 mA) to verify proper component operation. Visual inspection revealed system to be in normal operating condition with no visible damage or anomalies to the furnace or connected ventilation components.

Conducted thorough inspection of basement HVAC and ductwork system. Identified aging galvanized metal ducts with potential airflow restrictions and recommended replacement. Evaluated existing mechanical equipment mounted against concrete block wall for compatibility with new ductwork configuration.

Performed diagnostic gas analysis on heating system using Sauermann analyzer, which detected elevated carbon monoxide (CO) levels between 927-1139 ppm, indicating combustion issues. Oxygen levels measured at 3.23-3.61% with CO₂ readings around 9.7-9.9%, suggesting improper air-fuel mixture requiring adjustment or possible heat exchanger inspection.

Performed routine commercial tune-up on HVAC system. Noted significant mineral buildup and corrosion around valve connections on heat exchanger pipes. Cleaned accessible components and inspected electrical connections, observing proper wire terminations at motor assembly. System operational but recommend follow-up service to address progressive corrosion issues on heat exchange components.

Performed comprehensive HVAC tune-up service, including inspection of internal components, circuit board examination, and verification of all electrical connections. System wiring was assessed for proper termination and safety, with particular attention to the motor assembly and control board connections. All components were confirmed to be secure and operating within manufacturer specifications.

Performed comprehensive tune-up on Carrier Infinity HVAC system including inspection of ductwork integrity. Used diagnostic equipment (ST43) to verify system performance and functionality. Interior duct inspection revealed normal condition with no significant debris or damage observed.

Successfully installed new high-efficiency furnace with digital thermostat display showing proper operation at 26 degrees. Mounted Aprilaire whole-home humidifier on the system, connecting all necessary tubing and ensuring proper integration with the HVAC system. Applied service identification sticker with 24-hour service contact information for future reference.

Performed comprehensive HVAC tune-up service including inspection of furnace interior components, blower assembly, and electrical connections. Verified proper operation of motor and examined all wiring connections (red, yellow, green, white, and blue) for secure attachment and signs of wear. Inspected PVC condensate drain and exhaust connections, confirming proper sealing at rubber coupling points and checking for any blockages or leaks.

Diagnosed cooling system failure in a residential HVAC unit less than 10 years old. Inspection revealed control board malfunction in the air handler, identified by examining component specification labels and internal wiring connections. Replaced defective control board, reconnected all electrical terminals properly, and verified proper operation of cooling system before completing service.

Completed inspection of bathroom shower ceiling unit. Observed fully functioning showerhead and arm mount fixture with proper water flow. Noted presence of moisture on ceiling surface suggesting proper seal integrity, with no visible leaks or damage to the fiberglass/acrylic enclosure.

Performed diagnostic assessment of boiler control board system. Inspected circuit board displaying "On" status with multiple connection points and wiring harness intact. Visual inspection revealed no apparent electrical component damage or loose connections.

Performed annual maintenance tune-up on the residential gas furnace system located in the basement utility room. Inspected internal components after removing access panel, checked all electrical connections and wiring for proper operation. Examined the PVC ventilation system for proper installation and signs of leakage; all connections appear secure with no visible issues detected.

Performed routine tune-up service on HVAC system in basement utility room. Inspected ceiling-mounted ductwork and accessible components. Observed PVC Coreline pipe installation running between joists, which appears to be properly secured and in good condition. No immediate concerns identified with visible system components.

Performed routine maintenance on Carrier furnace system located in basement utility area. Inspected PVC intake/exhaust venting pipes and confirmed proper installation. Checked condensate drain lines and noted minor moisture staining around unit base which was addressed during service.

Performed indoor air quality service including inspection and replacement of AprilAire filter. Removed existing filter which showed visible contamination (green spot on metallic surface), indicating proper filtration was occurring but replacement was necessary. Installed new filter to maintain optimal IAQ and system efficiency.