Reliable Home Services in Franklin

Responded to no heat call with reported clicking noise from furnace. Upon inspection, found Armstrong furnace with control board displaying blue LED lights indicating power to unit. Identified significant moisture accumulation and water damage in lower cabinet area, with visible discoloration and staining on base panel. Clicking noise likely caused by relay or ignition control attempting to cycle. Documented internal condition showing blower motor, electrical connections, and control components all accessible with standard wiring configurations intact. Water intrusion appears to be affecting proper system operation and may be impacting safety controls or ignition sequence.

Responded to no cooling complaint on 20+ year old Amana HAC ductless mini-split system. Found condenser unit attempting to run but not producing airflow, while indoor wall unit displayed blinking error code when calling for cooling. Upon inspection, identified system controlled by Aprilaire wall thermostat, observed outdoor unit making operational sounds without fan operation, and documented aged equipment condition with weathered filter panels and outdoor components showing significant wear consistent with system age, indicating likely compressor or fan motor failure requiring further diagnostic testing or system replacement recommendation.

Completed routine cooling maintenance visit as part of membership agreement. Inspected HVAC system in attic installation, including air handler, ductwork, refrigerant lines, and condensate drain system. Delivered Aprilaire filter and smart thermostat for replacement as requested, with arrival scheduled within specified timeframe.

Responded to service call for reported leak in furnace piping previously identified by utility company. Performed diagnostic inspection of HVAC system including electrical testing with digital multimeter and thorough examination of outdoor condensing unit components. Inspected capacitor, contactor assembly, and associated wiring connections to assess overall system condition during tune-up service.

Performed annual boiler tune-up and maintenance service. Reset the ATT7 reminder light on the system control panel to clear the maintenance alert. Inspected boiler components including expansion tank, piping connections, valves, and pressure relief assembly. All primary heating system components found to be operational with expansion tank and valve manifold functioning as designed. System returned to normal operation upon completion of scheduled maintenance.

Completed standard AC tune-up maintenance on residential outdoor condensing unit. Unit is operational with proper airflow through condenser coils. Evaporator coil installation documentation was reviewed on-site, indicating CAPVU/CAPVL/CAPVP/CAFVP model specifications for future reference regarding refrigerant piping and metering device connections.

Performed inspection and diagnostic service on residential gas furnace system located in basement utility area. Unit features modern high-efficiency design with PVC intake and exhaust venting, accessed internal components through front service panel to evaluate operational status and mechanical condition. Documented equipment configuration including control board, blower motor assembly, and electrical connections for service records.

Completed preventative maintenance tune-up on residential HVAC system. Inspected and photographed air filter showing moderate dust accumulation on pleated media; filter remains serviceable but approaching replacement interval. Accessed condensing unit electrical compartment and inspected capacitor, contactor, and associated wiring connections; all components operating within normal parameters with secure wire terminations and no signs of electrical failure or overheating.

Completed plumbing estimate for existing sump pump system in basement utility area. Evaluated current sump pump installation including basin condition, discharge piping configuration, pump operation, and electrical connections. Documented system setup with vertical PVC discharge pipe mounted to wall with proper securing, pump placement within circular basin, and water level conditions at time of inspection to provide comprehensive assessment for potential service or replacement recommendations.

Performed comprehensive tune-up and safety inspection on residential gas furnace system. Accessed internal components, verified proper operation of blower motor and gas valve assembly, inspected electrical connections and wiring harnesses, checked intake and exhaust venting system, and replaced air filter to ensure optimal system performance and efficiency.

Completed comprehensive tune-up and performance evaluation on residential HVAC system. Performed diagnostic testing using calibrated digital instrumentation to verify system operation, inspected control wiring and electrical connections within air handler unit, and confirmed proper functionality of both the LASKO outdoor temperature control panel and digital thermostat displaying accurate temperature and humidity readings at 70°F and 67% respectively.

Completed HVAC system estimate for full equipment replacement in residential property. Assessed existing ductwork system in attic space, including metal supply plenum and PVC condensate drainage lines. Documented current system configuration and access points through interior ceiling opening to provide comprehensive replacement proposal for new heating and cooling equipment installation.

Completed HVAC system installation in residential property including new air handler unit and associated components. Installed black cylindrical air handler in basement mechanical room with proper connections to existing ductwork and electrical systems. Routed refrigerant lines and condensate drainage per manufacturer specifications. Verified all mechanical connections, tested system operation, and confirmed proper airflow throughout the residence. Installation includes integration with existing water heater and plumbing infrastructure. All equipment secured and labeled according to code requirements. System tested and operational upon completion of warranty work.

Completed HVAC system installation and startup procedures. Performed system commissioning using digital manifold gauges to verify refrigerant pressures and temperatures, confirming proper charge levels with readings of 114 PSIG on the low side and 300+ PSIG on the high side at 152°F. Programmed and tested Nest smart thermostat, setting cooling setpoint to 70°F with system responding appropriately to reach target temperature.

# HVAC System Installation and Start-Up Completed installation and initial start-up of new HVAC system at residential property. Connected refrigerant manifold gauge set to system's service ports to verify proper refrigerant charge and system pressures. Monitored both high-side and low-side pressures during start-up sequence to ensure operation within manufacturer specifications. Verified all refrigerant line connections were secure and properly sealed. System started successfully with pressures reading within normal operating range. All electrical connections at outdoor disconnect verified and secured. Equipment left in proper operating condition with no leaks detected.

Completed furnace inspection and system evaluation in mechanical room. Documented HVAC equipment installation including air handler unit, ductwork configuration, and associated mechanical components. Verified proper mounting of equipment, inspected duct connections and sealing, and examined electrical wiring routing throughout the ceiling joists to ensure compliance with installation standards.

Conducted on-site evaluation of existing HVAC system in residential property with vaulted ceiling and exposed beam construction. Assessed current equipment specifications, measured available installation space, and provided comprehensive replacement estimate for new heating and cooling system to meet the home's comfort requirements.

Conducted inspection of basement plumbing infrastructure including PEX water supply lines, PVC drain lines, and associated mounting hardware. Documented existing pipe routing, support systems, and junction connections between wooden floor joists and along foundation wall to assess current installation condition and identify any maintenance requirements.

Completed comprehensive HVAC tune-up on outdoor heat pump unit. Removed top cover to access internal components, inspected compressor cavity, condensate drain pan, and refrigerant lines for proper operation. Verified electrical connections, tested control wiring and valve assembly, and confirmed all mechanical components are functioning within normal parameters.

Completed system start-up and commissioning of newly installed HVAC equipment using Fieldpiece SMAN digital manifold and Yellow Jacket Titan 4-valve gauge set. Verified proper refrigerant charge levels for R454B refrigerant, confirmed system pressures and temperatures were within manufacturer specifications, and documented all operational parameters to ensure optimal system performance.