Exceptional Home Services in Fox Point

Completed HVAC ductwork installation in basement utility area. Installed metallic rigid ductwork with proper mounting brackets and ceiling supports, including elbow transitions for optimal airflow routing. Connected flexible and rigid ductwork to water heater exhaust system with appropriate venting materials and reflective insulation wrapping to meet code requirements for safe operation.

Conducted comprehensive assessment of existing residential boiler system for replacement estimate. Evaluated current gray cabinet-style boiler unit with manifold distribution system featuring multiple zone valves and copper supply lines. Documented existing installation including piping configuration, manifold assembly with blue and green-handled zone valves, and associated circulation pump. Assessed condition of copper piping network, insulated supply lines, and connection points throughout the heating distribution system. Photographed current equipment specifications, manufacturer labels, and existing plumbing arrangement to provide accurate replacement recommendations and ensure proper system sizing for the application.

Completed seasonal tune-up on Unico high-velocity A/C system located in attic and mid-efficiency boiler system in basement. Performed comprehensive inspection of boiler components, hydronic piping manifold with zone valves, and verified proper operation of multi-zone heating system to address customer concern regarding uneven room temperatures. Inspected all accessible ductwork, copper supply lines, and mechanical connections; system operating within normal parameters at time of service.

Performed comprehensive tune-up on residential air conditioning system, including refrigerant pressure and temperature diagnostics using digital manifold gauge set. System readings confirmed proper superheat and subcooling levels, with left side showing 12.8 PSIG at 41.1% saturation and right side reading 191.7 PSIG at 88.8% saturation, indicating normal operating parameters for the outdoor condensing unit.

Returned for follow-up on previously reported condensation leak. Customer provided video documentation showing exact leak location. Inspected air handler unit in attic space and verified condensate drain system including PVC drain lines. Examined unit cabinet, refrigerant lines, and surrounding area for moisture intrusion points. Documented current conditions with photos showing air handler installation, insulated ductwork connections, and drain line configuration to determine source of ongoing condensation issue.

Conducted comprehensive site assessment of ranch-style home with partial finished basement to evaluate feasibility and routing for installation of bedroom return air ducts and first-floor exhaust fan system. Inspected existing ductwork infrastructure, floor joist cavities, and available pathways through basement ceiling space to determine optimal placement for new return air grilles while minimizing structural modifications. Documented current HVAC system configuration including main supply and return trunk lines, noting locations of mechanical equipment and existing utility runs that would impact new ductwork installation. Evaluated basement framing, exposed joists, and wall cavities to plan efficient routing that would accommodate proper return air flow while avoiding conflicts with existing plumbing, electrical conduit, and structural members. Assessed accessibility for installation of first-floor exhaust fan including potential mounting locations, exterior venting pathways, and ele

Completed prepaid membership cooling system maintenance visit. Performed comprehensive inspection and preventive maintenance on residential split-system air conditioning equipment, including outdoor condenser unit with cylindrical design and Lennox indoor furnace/air handler. Verified system operation, checked refrigerant levels, inspected electrical connections, cleaned components as needed, and confirmed proper airflow. All equipment found operating within normal parameters with no immediate service concerns identified.

Responded to service call for leaking exterior hose faucet. Upon inspection, identified compromised ball valve with red handle connected to copper supply line in utility area. Valve exhibited signs of wear and active leak at connection point. Assessed existing copper piping configuration, including vertical runs and 90-degree elbow joints. Determined replacement of ball valve assembly was necessary due to extent of deterioration. Completed diagnostic evaluation of plumbing system to verify proper water flow and pressure post-repair recommendations.

Completed installation of Unico air handler system in utility room over a three-day period. System includes properly configured ductwork, supply and return air components with wall-mounted return grille, and all necessary piping and valve assemblies for optimal operation.

Completed routine maintenance on two outdoor air conditioning condenser units as part of prepaid membership cooling visit. Performed comprehensive tune-up procedures on both systems, including temperature diagnostics with digital thermometer showing 97.1°F reading at condenser unit. Both units operational and functioning within normal parameters following maintenance completion.

Completed rescheduled system start-up following previous cold weather delay. Verified refrigerant charge levels and measured system temperatures, confirming proper operation with suction line temperature reading at 51.9°F. Inspected refrigerant line connections and penetrations through cabinet structure, ensuring all fittings and seals were secure with no visible leaks or defects.

Installed new faucet spout assembly per approved estimate. Verified proper operation of existing P-trap drain assembly and water supply connections beneath vanity, ensuring all plumbing components remain secure and leak-free following spout replacement.

Completed shower mixing valve repair and chrome fixture installation. Accessed plumbing behind tile wall to replace faulty mixing valve with new unit, ensuring proper water temperature control and flow regulation. Reinstalled chrome-plated shower diverter fixture with dolphin-shaped handle and shield mounting plate, securing all components to manufacturer specifications. Restored wall opening and verified all connections for proper operation and leak-free performance.

Completed air conditioning tune-up at new property with Lennox HVAC system. Performed standard maintenance inspection of indoor furnace unit and outdoor condenser coil, documented equipment information, and noted outdoor coil requires cleaning due to heavy dirt and debris accumulation restricting airflow through fins.

Completed HVAC system installation and startup procedures. Inspected gas valve assembly, electrical connections, and all mechanical components to verify proper operation. System tested and confirmed functioning within manufacturer specifications with all safety controls operational.

Conducted comprehensive site assessment for complete HVAC system replacement at residential property. Evaluated existing rooftop condensing unit showing significant age-related deterioration, with weathered electrical conduit and wiring requiring upgrade to current code standards. Documented condition of rubberized membrane roofing surface displaying moderate wear and water staining around equipment mounting area. Assessed interior ductwork configuration including flexible metallic ducts and junction components in ceiling plenum space. Provided detailed replacement estimate covering new high-efficiency condensing unit installation, upgraded electrical disconnect and wiring, proper equipment mounting with roof penetration sealing, and integration with existing duct distribution system to ensure optimal airflow and system performance.

Completed HVAC system replacement including installation of new air handler unit with R410A refrigerant specification. Connected flexible ductwork with reflective foil insulation, routed copper refrigerant lines with protective spiral wire insulation, installed electrical connections, and PVC condensate drain lines in mechanical space above doorway area.

Completed installation of modern shower system featuring chrome-finished fixtures including wall-mounted showerhead, handheld spray attachment with mounting pole, and control valve assembly. Installed light gray rectangular tiles with marble veining in horizontal brick pattern throughout shower walls and basin area, along with white accessibility grab bar for safety compliance. All fixtures properly mounted and sealed to ensure water-tight operation.

# HVAC System Replacement Estimate Conducted comprehensive evaluation of existing residential HVAC system for replacement. Assessed indoor air handler unit with current 14x25x1 filtration system and connected ductwork infrastructure. Documented furnace cabinet access panel with operational instructions and existing insulated supply plenum connections. Evaluated electrical wiring configuration and mounting hardware for indoor equipment. Inspected outdoor condensing unit positioned on concrete pad against brick exterior wall. Unit exhibits cylindrical design with horizontal fin configuration typical of older model air conditioners. Documented electrical disconnect box mounted to structure with conduit routing to outdoor unit. Assessed concrete pad condition showing weathering and vegetation growth, indicating extended service life. Noted landscape mulch bed proximity to equipment and drainage considerations for replacement installation. Prepared equipment specifications and replacemen

Performed scheduled prepaid HVAC maintenance inspection. Examined interior ductwork components for integrity, noting normal wear on galvanized metal surfaces. Inspected insulated ducting and verified proper sealing at connection points with temperature probe, observing appropriate insulation condition with no significant deterioration requiring immediate attention.